by admin on 04 Feb 2014, 23:09
Okay, let's see if I can remember this without looking at it:
1. Machine must be running, parking brake set, rear implement (tiller, presumably) in the lowered position (i.e. on the ground), and hold-down bolts should be removed from the bed.
2. On the driver's side of the doghouse, near the coolant reservoir, there should be a selector lever to choose to raise or lower (it should have little pictures...). Push the lever toward the up arrow.
3. Both valves (the big levers) should be pointing out toward you, IIRC, to raise the bed. To raise the cab, I think it's one in and one out, but I don't recall. You'll have to experiment.
4. Press the little black plunger to engage the hydraulic lift.
5. To lower everything, just switch the selector toward the downward arrow, and press the plunger.
I may have forgotten something............. but that should at least help refresh your memory.