BR350-07-HDP unit

Discuss troubleshooting and maintenance of Bombi, Camoplast, and Prinoth snowcats here.

BR350-07-HDP unit

Postby zeke on 03 Jan 2011, 16:31

well this is an iterresting one & any feedback would be awsome!
our 07 br350 is having intermittent shut down of the tiller rotors,all rear hydaulics work normally..now there is a number 12 output LED (green) on the HDP unit witch is an autorisation for tiller on/off & the only output that comunicates with the MP...this light will go off when tiller is autorised & on when not (normal)
in turn stopping signle to tiller pump,have tested all switches & speed pot related to tiller functions and all seems normal..(basicly what input controlls this number 12 output)...??

This is a gost problem...
zeke
 
Posts: 5
Joined: 04 Dec 2010, 23:03

Re: BR350-07-HDP unit

Postby smckinstry on 27 Jun 2011, 23:49

check the safety stop on the dash near the throttle control could be intermittent . also the auto rise HDP receives a signal form the steering controls FNR, drive processor.
smckinstry
 
Posts: 1
Joined: 27 Jun 2011, 21:28

Re: BR350-07-HDP unit

Postby zeke on 28 Oct 2011, 20:56

hay thankyou for the input the cats out pushing at the minut after summer sevice but will look into your advice once its starts grooming...thanks again buddy :) will let you know case others have a similar problem.
zeke
 
Posts: 5
Joined: 04 Dec 2010, 23:03


Return to Bombardier/Camoplast/Prinoth Maintenance, Repair, and Troubleshooting

Who is online

Users browsing this forum: No registered users and 5 guests

cron